Fork Extensions

This page contains information about:
Fork Spreaders | Hydraulic Reachforks | Fork Slippers | Roller Folks

Fork Spreaders

Type FS2.5 Fork Spreader

The FS2.5 Fork Spreader is designed to safely lift extra wide or flexible loads without the risk of damage to products such as plasterboard, roof sheeting and timber.

The fork spreader evenly distributes the load over its full length. This slip-on attachment is easily fitted onto the fork lift and is secured by a safety chain. Enamel paint finish.

• Safe Working Load: 2500 kg
• Load Centre: 600 mm
• Unit Weight: 225 kg
• Fork Pocket size: 160 mm x 60 mm
• Fork Pocket Centres: 775 mm

Click image to enlarge specifications

Custom size and capacity available on request

---

Type FS3/LG Fork Spreader

The FS3/LG is manufactured with a load guard, giving additional protection and capacity. This unit is more suited to where higher loads of loose product are being handled. Enamel paint finish.

• Safe Working Load: 3000 kg
• Load Centre: 600 mm
• Unit Weight: 260 kg
• Load Guard Height: 600 mm
• Fork Pocket size: 160 mm x 60 mm
• Fork Pocket Centres: 775 mm

Click image to enlarge specifications

Custom size and capacity available on request

Hydraulic Extension Reachforks Type RG Reachforks Reachforks are hydraulically extendable and retractable forks, which allow for 'double-deep' stacking, increasing warehouse capacity by up to 30% compared to 'single-deep ' warehouse operations. Reachforks also allow trucks to be loaded & unloaded from one side eliminating the need to turn the vehicle or drive the forklift to the opposite side making the operation much safer. To operate the reachforks, the forklift requires one additional hydraulic function. Options available: Pallet Stops - preventing the reachforks from protruding through to the rear pallet Load Guards - custom made to suit if required RG Reachforks Specifications Click to enlarge diagram Type Length "L" (mm) Extension "K" (mm) Cross Section "D" x "S" (mm) SWL (kg) at 600mm Load Centre (mm) Weight Per Pair| (kg) ISO/FEM Mounting Class RG2 30 1100/750 1100 750 140x56 3000 165 Class II RG2 30 1200/850 1200 850 140x56 3000 175 Class II RG2 30 1350/1000 1350 1000 140x56 3000 190 Class II RG4 25 1100/750 1100 750 170x56 2500 175 Class II RG4 25 1200/850 1200 850 170x56 2500 185 Class II RG4 25 1350/1000 1350 1000 170x56 2500 200 Class II RG4 35 1200/850 1200 850 170x56 3500 210 Class II/III RG4 35 1350/1000 1350 1000 170x56 3500 230 Class II/III RG4 45 1200/850 1200 850 170x56 4500 215 Class III RG4 45 1350/1000 1350 1000 170x56 4500 235 Class III To ensure correct selection of reachforks, please contact Active Lifting to discuss your particular application and specifications.

Fork Slippers Type FE Fork Extension Slippers The FE Fork Extension Slippers extend the versatility of the fork truck. These slim profile slippers have been designed and manufactured in accordance with AS2359.15. In accordance with AS2359.15 slippers used for general usage should be no longer than 167% of the supporting tine's length. If the slippers are longer than 167% then the usage of those slippers shall be restricted to their specified application. Made from high tensile grade steel Zinc plated for corrosion protection (Type SL Painted) High Safe Working Load (SWL) rating Supplied with toggle locking pins Fitted with Rating Plate Supplied with Instructions

Type Length mm To Suit max tine size (mm) Weight per pair (kg) SWL per pair at 600 mm l/c FE1-16 1600 100 X 45 50 3000 FE1-18 1800 100 X 45 56 3000 FE1-21 2100 100 X 45 66 3000 FE1-24 2400 100 X 45 75 3000 FE2-16 1600 130 x 50 60 4500 FE2-18 1800 130 X 50 66 4500 FE2-21 2100 130 x 50 78 4500 FE2-24 2400 130 X 50 88 4500 FE3-16 1600 155 x 55 91 6500 FE3-18 1800 155 x 55 102 6500 FE3-21 2100 155 x 55 119 6500 FE3-24 2400 155 x 55 136 6500 FE3-30 3000 155 x 55 170 6500 FE4-18 1800 160 x 65 133 8500 FE4-21 2100 160 x 65 155 8500 FE4-24 2400 160 x 65 177 8500 FE4-30 3000 160 x 65 221 8500 SL5-18 1800 Custom built to suit 170 8000 SL5-21 2100 Custom built to suit 200 8000 SL5-24 2400 Custom built to suit 220 8000 SL5-30 3000 Custom built to suit 280 8000 SL6-21 2100 Custom built to suit 380 12,000 SL6-24 2400 Custom built to suit 430 12,000 SL6-30 3000 Custom built to suit 540 12,000 SL6-35 3500 Custom built to suit 630 12,000 SL7-24 2400 Custom built to suit 520 16,000 SL7-30 3000 Custom built to suit 650 16,000 SL7-35 3500 Custom built to suit 760 16,000

 

Roller Forks

Type: RFC Roller Forks

Perfect for container loading, Roller Forks allow for products such as bulk bags, cartons and other bagged products to to be transported and loaded, using slip-sheets where required, thereby eliminating the use of pallets.

Able to be fitted to most forklifts with no additional hydraulics required, simply replace the existing tines on the fork truck with the Roller Forks. Fitted with an ingenious roller design, these forks simply roll under the slip sheet. Once the goods are lifted, the rollers are retracted, ensuring the load is securely positioned.

• Safe Working Load: 2000 kg at 500 mm L/C
• Tine Length: 1100 mm
• Tine dimensions: 210 mm x 48 mm

Type	Weight Per Pair (kg)	ISO/FEM Mounting Class
RFC 20-1100	150 kg	Class II