Contact Us
Phone
 
Active Lifting Equipment Co. Pty. Ltd.

Crane & Overhead Lifting

Crane Work Platform Cages

All Active Lifting Equipment crane work platform cages are designed and manufactured in accordance with AS1418.17 and are supplied with load test certificate, instruction manual, risk control measures and WorkCover registration. Fork pockets fitted for transport purposes only. Personnel cages are supplied with chains, safety harness anchor points and are painted Safety Yellow enamel.

WP-C Work PlatformType WP-C

Two person cage with mesh roof.

  • Maximum capacity: 2 people
  • Safe Working Load: 250 kg
  • Unit Weight: 160 kg
  • Fork Pocket Size: 165 mm x 65 mm
  • Fork Pocket Centres: 775 mm

WP-C2 Work PlatformTYPE WP-C2

Four person cage with mesh roof.

  • Maximum capacity: 4 people
  • Safe Working Load: 500 kg
  • Unit Weight: 400 kg
  • Fork Pocket Size: 245 mm x 65 mm
  • Fork Pocket Centres: 950 mm
  • Size 2400 x 1200 x 2200 mm High

WP-C2 Fully Meshed Crane Cage Can be used for FIRST AID RESCUE. The WP-C2 can be used for first aid rescue, however access gate to cage must be modified to an outward opening gate during manufacture. Please advise us accordingly when making inquiry.

The picture to the right shows a Special WP-C2 fully mesh enclosed rescue cage.

All Crane Cages are designed strictly in accordance with AS1418.17, and are supplied with load test certificate, instructions for usage and Workcover registration. Supplied with lifting chains. Enamel paint finish safety yellow

WP-C11 Work PlatformType WP-C11

Two person cage without roof.

  • Maximum capacity: 2 people
  • Safe Working Load: 250 kg
  • Unit Weight: 160 kg
  • Fork Pocket Size: 165 mm x 65 mm
  • Fork Pocket Centres: 775 mm

 

WP-C4 Work PlatformType WP-C4

One person cage without roof.

  • Maximum capacity: 1 people
  • Safe Working Load: 250 kg
  • Unit Weight: 120 kg
  • Fork Pocket Size: 165 mm x 65 mm
  • Fork Pocket Centres: 555 mm

WP-C8 Work PlatformType WP-C8

One person cage fitted with roof.

  • Maximum capacity: 1 people
  • Safe Working Load: 250 kg
  • Unit Weight: 150 kg
  • Fork Pocket Size: 165 mm x 65 mm
  • Fork Pocket Centres: 555 mm

WP-C3 Work PlatformType WP-C3

One person circular cage.

  • Maximum capacity: 1 people
  • Safe Working Load: 250 kg
  • Unit Weight: 160 kg

Goods Cages

BSN6 Brick CageType: BSN6 Brick Cage

The BSN6 Brick Cage is designed to convey pallet of bricks or similar loose products safely to a work location via overhead crane.

Suitable for 1200 mm square pallets (1240 mm clear inside) and up to 1500 mm overall height. Zinc plated finish. The cage can be supplied as a fully assembled welded unit BSN6W or as a flat self assembly BSN6F which is then bolted together.

  • BSN6 Brick Cage Flat PackSafe Working Load: 2000 kg
  • Lifting Points: 4 point lift
  • Unit Weight: 255 kg
Specifications Internal Width (mm) Internal Depth (mm) Internal Height (mm) Overall Width (mm) Overall Depth (mm) Overall Height (mm)
BSN-6W-Welded 1240 1240 1500 1340 1340 1720
BSN-6F-Bolted - - - 1400 1700 400

CSPN Crane Goods CageType: CSPN Goods Cage

See a VideoSafely convey loose or palletised goods using either forklift or crane. The full width gate allows 1200mm square pallets to be placed inside. Fitted with crane lifting lugs, fork stirrups and interlocking feet, this versitile cage can also be safety stacked. Zinc plate finish


Specifications:

  • CSPN Crane Goods CageSafe Working Load: 1000 kg
  • Unit Weight: 175 kg

Gas Cylinder Cages

Type: GCN2 Gas Cylinder Cage

GCN2 Gas Cylinder CageSuitable for one type "G" Oxygen and one type "G" Acetylene gas cylinder with provision to store all hoses inside the cage. The cage is supplied with an internal loadbinder to securely fasten both cylinders.

Fitted with handle, crane lift piont and 400 mm diameter air inflated rubber wheels, this cage can be transported manually or by crane. Enamel paint finish.

  • Safe Working Load: 250 kg
  • Unit Weight: 80 kg

Type: GB-CM Storage Cage

GB-CM Gas Cylinder CageSecure gas cylinder storage cage, suitable for environments such as building sites and mines. Cage is fitted with crane lifting lugs and fork pockets underneath.

Cage is fitted with a lockable door and has a full metal roof providing weather protection. A securing load binder prevents cylinder movement during transport. Enamel paint finish.

  • Safe Working Load: 1000 kg
  • Unit Weight: 180 kg
  • Fork Pocket Size: 165 mm x 65 mm
  • Fork Pocket Centres: 805 mm

 

Enquiry Form

This is a short form you can submit to request information from Active Lifting:

Please provide the following contact information
Items marked with an * are required fields.

* Name
Title
Organisation
Street Address
Address (cont.)
City
State
Postal code
Country
Work Phone
FAX
* E-mail
Web Site
Please provide the following product information you are enquiring about if known:
Product name
Type
Enter any questions you have in the box below.

 

When you have completed the form, please press the Submit Form button below:

Google
www activelifting.com.au
 
Materials Handling | Dangerous Goods | Lifting Equipment | Electronic | Safety | Architectural Fittings | Rud Lifting & Lashings | Wire Rope | Testing & Procedures
Home | Contact Us | | Links | Policy | Search | Secure Payments
34 York Street, Wingfield, South Australia 5013  Ph: 08 8359 1241    Fax: 08 8359 1237    Mob: 0414 347 404 
Copyright © 1999 Active Lifting Equipment Co. Pty Ltd.         Site Design & Maintenance by B & P THURSBY Digital Services