Work Platforms and Goods Cages

Type: WP-MS Work Platform

The type WP-MS Work Platform has been designed to safely carry out tasks of short duration and occasional usage, such as maintenance or stocktake. Manufactured in strict accordance with AS2359 suitable for a maximum of two people, the WP-MS cage has full mesh panels, eliminating any possibility of objects falling from the cage. Supplied standard as "flatpack" for on site assembly, or may be supplied fully assembled upon request.

SPECIFICATIONS:

Safe Working Load: 250kg
Unit Weight: 122kg
Fork Pocket Size: 160 x 60mm
Pocket Centres: 640mm
Supplied with 4 fixed Harness Anchor Points
Supplied with locking pins
Zinc Plate Finish

NOTE: The use of this Work Platform on a Forklift truck should not be considered if the lift capacity of that Forklift is less than 1860kg for a counterbalanced type or 1116kg for a straddle type Forklift.

Type: WP-N Work Platform

The type WP-N Work platform has been designed to safely carry out tasks of "short duration" and "occasional usage", such as maintenance or stocktake. Manufactured strictly in accordance with AS 2359.1 the type WP-N Work Platform is suitable for a maximum of two people. Supplied with slipper locking pins and 2 harness anchor rings.

Unit is supplied standard as a "Flatpack" (1230 x 1150 x 200 mm), or may be fully assembled upon request. Zinc plate finish.

Safe Working Load: 250kg
Load Centre: 600 mm
Unit Weight: 110 kg
Fork Pocket Size: 160 mm x 60 mm
Fork Pocket Centres: 640mm

* The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1825kg for a Counterbalanced type or 1095kg for a straddle type forklift.

Type WP Work Platform

WP-N Work Platform With a fully welded construction the WP Work Platform is supplied complete with slipper locking pins and two harness anchor rings. Available in either enamel paint or galvanised finish.

Safe Working Load: 250kg
Load Centre: 600 mm
Unit Weight: 115 kg
Fork Pocket Size: 160 mm x 65 mm
Fork Pocket Centres: 640 mm

Type WP-OP Order Picker Platform

Manufactured in strict accordance with AS 2359.1 and AS2359.6 the WP-OP Order Picking Cage must only be lifted by a dedicated 'Order Pickeing Forklift'. They can be custom made to suit individual forklifts and applications. The load capacity of the forklift will restrict the actual load capacity of the Order Picking Cage. Enamel paint finish.

Safe Working Load: 1000 kg
Load Centre: 600 mm
Fork Pocket Size: 140 mm x 66 mm
Fork Pocket Centres: 560 mm
Unit Weight: 180 kg

Click image to enlarge Specifications

Type: WP-OPG Order Picker Platform.

Built to the same dimensions as the standard WP-OP but also fitted with a full width outward opening gate, enabling access to stock where required. Enamel paint finish.

Type: WP-GC Goods Cage

WP-GC12

The WP-GC forklift goods cage is suitable for storage and transport of furniture and whitegoods. It is ideal for the transportation of goods between ground and mezzanine levels. Enamel paint finish.

The WP-GC forklift goods cage is NOT designed or certified to convey personnel.

Safe Working Load: 1000 kg
Fork Pocket Size: 160 mm x 60 mm
Fork Pocket Centres: 644 mm

WP-GC Goods Cages

Type	Width (mm)	Depth (mm)	Height (mm)	Weight (kg)
WP-GC 12	1200	1200	1000	150
WP-GC 18	1800	1200	1000	190

Type GB-P Gas Cylinder Cage

Suitable for storage and transport of gas cylinders, the GB-P is fitted with a drop down ramp allowing for bottles to be rolled easily into position wothout lifting. Supplied with load binder to secure cylinders. Enamel paint finish.

Dimensions: 1200 mm x 1200 mm x 1000 mm high.
Safe Working Load: 1000 kg
Unit Weight: 120 kg

Type: GB-SC Gas Cylinder Storage Cage

This cage is designed as a safety cage suitable for gas cylinder storage and transport. The cage is fitted with crane lugs for overhead lifting, as well as having fork pockets for transportation by forklift.

The cage is fitted with 50mm load binder to secure cylinders of all sizes and combinations.

SPECIFICATIONS:

Safe Workling Load: 1000 kg
Unit Weight: 180 kg
Zinc Plate Finish

Enquiry Form

This is a short form you can submit to request information from Active Lifting:

Please provide the following contact information
Items marked with an * are required fields.

* Name
Title
Organisation
Street Address
Address (cont.)
City
State
Postal code
Country
Work Phone
FAX
* E-mail
Web Site
Please provide the following product information you are enquiring about if known:
Product name
Type
Enter any questions you have in the box below.

When you have completed the form, please press the Submit Form button below: