The newest addition to the Gorbel
family of Intelligent Assist Devices |
|
History of the Easy Arm Evolution
- G-Force Intelligent Lifting Device released 1999 by Gorbel
- Plant Engineering’s Product of the
Year in 2000 - Product of the Year Finalist in 2002
(BXi unit) - Gorbel realised they needed:
- a low headroom solution
- a design to reach in/reach around
- lower cost crane for local handling ** Easy Arm concept introduced at Feb. 2003
US Promat show. Generated a lot of excitement!
|
 |
The Brains of a G-Force, The Body of
a Jib
The Easy Arm combines the precision and speed of the
G-Force with the flexibility and maneuverability of an articulating
arm.
This combination of precision and flexibility results in an easy
to move, cost effective lifting solution that operators will love to
use. |
 |
| Specifications |
| Capacity |
70 kg (load & tooling) |
| Maximum Lifting Speed |
38 mpm for a 70 kg load;
45 MPM UNLOADED
|
| Standard Span |
1.8M and 2.4M and 3M |
| Standard height Under Hook |
1.8M and 2.4M |
| Degree of Rotation |
Primary Arm = 370° on all spans.
1.8M span, Secondary Arm = 270°
2.4M and 3M span, Secondary Arm = 315° |
| Duty Cycle |
H5 continuous duty |
| Power Supply |
240 V, single phase, 50Hz |
| G-Force Model |
BX-based unit, optimized for a cantilevered jib arm |
|
Features |
Benefits |
Arm pivots in two places on the boom |
Easier access for hard to reach areas |
Light weight arm/actuator
mounted @ pivot |
Ease of movement |
| Tension adjusted at pivot points |
Control and ease of rotation |
G-Force servo-power and
software to control lifting device |
Precision movement
Speed (45mpm) |
|
 |
Features |
Benefits |
| Levelling adjustment on primary arm |
Easy levelling/shimming |
| Wire rope over pulleys |
Low headroom |
|
|
Features |
Benefits |
Optimised 4-bolt base
plate requires no
foundation |
No foundation costs
Low installation costs
Portability |
| Adjustable upper and lower limits |
Helps operators pinpoint target pick/place heights |
| Float mode (optional) -- "hands on part" |
Allows operators to easily orient & manipulate the load |
|
|
Features |
Benefits |
| Comes assembled in a box |
Ease of installation
Added protection during shipment |
|
 
|
Safety Features:
- Anti-recoil Technology – doesn’t recoil with sudden
change in load
- Power loss protection – locks into place in the event of
a power loss
- Capacity overload protection – warning lights indicate when
the load exceeds its rated capacity
- Operator present switch – a safety interlock that prevents movement
unless initiated by the operator
Non-defeatable |
 |
Some Areas of Use
- Machining applications – metalworking
- Lightweight assembly
applications
- Automotive / related industries
- Warehousing
- Manufacturing with precision handling
|
Applications
- Reaching under obstructions/ low headroom applications-wire goes
over a pulley on the beam so you don't lose the headroom taken by
the G-Force actuator.
- Reach around obstructions
- Reach into work cells/doorways
- Rapid change in direction - you don't have to move the weight
of the actuator
|
Application
Tips |
1. Avoid Long Spans
Longer Spans = Harder to move - selecting an unnecessarily long span will cause
handling problems - The rule here is "Less is More, Don't Over
Crane" |
2.Avoid High Hook Heights
Higher Hook Height = Less Control of the Load - choose the shortest Height Under
Hook possible to avoid excessive pendulum effect. |
|
Conclusion...
- Safetech’s Easy Arm is the perfect solution in areas that
are hard to reach
- The Easy Arm is perfect in low headroom applications
- The Easy Arm is a cost-effective solution for moving materials
in a work cell
- Very low installation costs
- Pre-assembled unit can be installed very quickly
- No foundation is required, so site preparation costs and time
are eliminated.
|
|
