Big Haul™ Wire Rope Hoist

Hand Lever Wire Rope Creeper Winch
available in 3 model capacities 800kg, 1600kg & 3200kg

A versatile portable and compact winch for pulling, lifting, lowering, spanning, 4WD recovery and securing loads over large distances. Complies to AS1418.2

Features:

• Lightweight, safe and easy to operate.
• Compact, high strength aluminium alloy housing with smooth contour design, a large flat base surface for increased stability in horizontal and vertical working positions.
• An overload protection system is built-in with a shearing pin in the forward lever which will shear when approximately 25% overloaded. The broken pins can be replaced without removing the load. Spare pins are located in the operating lever for RVBH08 and in the handle for RVBH16 and RVBH32.
• Forward and reverse lever placed in tandem, providing a slim compact design for storage and ensuring maximum power transfer.
• The rope clamp system is easily disengaged with a lever, allowing smooth installation of the wire rope.
• The Big Haul Creeper Winch comes complete with operating lever and 20m of wire rope mounted on a reel for all models. The wire rope is fitted with a safety latch hook at one end and is tapered at the other end for easy access into the unit.
• The Big Haul Creeper Winch has a parallel clamping system, which has a large surface contact area, providing an evenly distributed grip at a lower force that results in less rope wear. The system offers a longer rope advance and requires less handle pulling effort, thus increasing operator efficiency.
• All models are equipped with an anchor bolt that offers numerous connection possibilities with load hooks, wire rope and chain slings.
• All Big Haul Creeper Winches are tested and have individual serial numbers for easy traceability to a test certificate.
• Big Haul Creeper Winches are easy to maintain, service and repair.
• Complies to AS1418.2

Dimensions

Model	A mm	B mm	C mm	D mm	E mm	F mm
RVBH08	430	165	230	60	800	N/A
RVBH16	540	190	300	75	790	1200
RVBH32	660	220	330	110	790	1200

 

Specifications

Models	RVBHOB	RVBH16	RVBH32
Rated Lifting Capacity	800kg	1600kg	3200kg
Pulling Capacity	1250kg	2500kg	5000kg
Rope advance per full stroke cycle	60mm	60mm	40mm
Effort on handle at rated lifting capacity; Forward Operation	284kn	412kn	441kn
Diameter of wire rope	8.3mm	11mm	16mm
Standard wire rope length	20mt	20mt	20mt
Factor of safety of wire rope	5	5	5
Nett weight of wire rope and reel	7.5kg	12.0kg	23.5kg
Nett weight without wire rope	6kg	13kg	22kg

 

Note: For hoisting: A wire rope fitted with a load rated Grade T(80) swivel self locking hook (not included) must be used as indicated in Fig 3.

Fig 1. Eye safety sling hook supplied with Models RVBH08 and RVBH16 for pulling purposes

Fig 2. Eye self-locking Grade 80 hook supplied with Model RVBH32 for pulling purposes

Fig 3. For Hoisting Eye swivel self-locking Grade 80 hook (optional for all models).