Load Cells and Load Safety Equipment
Welcome to our Electronics area
Our aim is to provide quality equipment to all industries. In conjunction with our associates we have been involved with designing and manufacturing Load Cells and related monitoring equipment for many years. We are highly regarded in this field and our advice is frequently sought to provide solutions for our customer's problems. We have steadily expanded our product range, with the assistance of specialised input from our engineering and electronic associates.
Our combined knowledge and experience enables our company to provide solutions for the majority of our customer's applications. We are a non-aligned manufacturer and distributor of electronic equipment. As we are not tied to any one manufacturer, we are free to specify the best products for our customer's requirements.
We supply equipment for use in the Oil, Mining and general industries. We are committed to Customer Service on all our products.
Annular Ring Cells
Standard and custom designs made to suit your application where possible.
Capacity 5t to 100t, contact us for other capacities.
Beam Load Cells
Low profile shear beams aluminium and tools steel versions
Capacity 3kg to 10t
Shackle Load Pins
Can be supplied with handheld readout and carry case.
Capacity 5t to 100t, contact us for other capacities.
Miniature 4 - 20 mA PCB (Printed Circuit Board)
We manufacture several designs of these PCB’s. When seeking information please supply specifications of your Load Cell, the mill Volt output and your intended application. We can supply Displays with 4 – 20mV outputs and these may be more suitable for your application.
Standard Tension Cells
Can be supplied with cable attached handheld readout and carry case.
Optional design with 4 - 20mA output and telemetry radio systems.
Capacity 2t to 100t, contact us for other capacities.
Compression Load Cells
These Compact Ring – Torsion Load Cells provide high accuracy even for very small utilization ranges. The high output signal provides a high resolution of useful signal range. The design is sturdy with minimal effect on accuracy by side forces. These cells will operate under very harsh environmental conditions. Several mounting structures are available to suit most applications.
Load Pins
Available in Tool Steel and Stainless Steel with Digital Indicators. Load Pins are individually manufactured to suit your project. They can be supplied with 4 – 20mA outputs to connect directly into PLC equipment. Standard capacities are 2t – 100t, however other capacities can be manufactured. Contact us with your project information so that we can assess the application. For manufacture please complete the Load Pin Data Sheet
CLICK TO SEE:
Load Pin Specifications enquiry and order form
'S' Cells
These Cells can operate in Tension or Compression. A variety of capacities are available. Also several different designs are available to suit different applications. Contact us with details of your project and we will assess the suitability for your application.
Special Tension Cells
Custom designs are available and where possible we will manufacture to suit your application.
Capacity 2t to 100t, contact us for other capacities.
Overhead Gantry Cranes
Load measuring and safety cut out systems
available with large digit Bright LED's for installation onto the main and auxiliary winches.
Large Digital Displays
57mm 4 Digit Display
Visible to 25 Metres.
Hood standard, hood removal optional.
An optional panel mount kit is available for this model.
100mm 4 Digit Display
Visible to 50m
100mm 6 Digit Display
Visible to 50m
Display shown with optional
hood available on all models.
Not applicable to 57mm 4 digit display.
178mm 4 Digit Display
Visible to 80m
Handheld Displays
Cable attached and Telemetry Radio Handheld Displays are available along with Large Digit Bright LED Displays. The choice of Display depends upon the application and where the Load Cell System will be used. Contact us for advise on the best Display for your project.
Load Cell Simulator
Makes fault finding easy, use the simulator to replace your load cell.
350 ohm bridge is standard other values are available upon request.
Dynamometer or Running Line Tensiometers
Models as displayed
Model 3, Model 2 and Model 1
Model 1 fits ropes from 1/2" through 7/8". (12mm - 22mm)
Model 2 fits ropes from 7/8" through 1-1/8".(22mm - 28mm)
Model 3 fits ropes from 1-1/4" through 1-1/2".(32mm - 36mm)
Contact us for other models.
Simple reliable design.
Prevents stress and breaking cables.
Designed to continually monitor tension loads on wire rope.
Tensiometers are put to use on mobile cranes.
Drilling rigs to measure drill bit pressure.
Towing applications for ships or the fishing industry.
The design is simple. Three precision roller bearing sheaves are mounted in a rigid frame. The rope to be monitored is threaded through the sheaves. As tension increases the centre sheave applies pressure against the load pin load cell. This force is transmitted as an electrical signal to the display as a direct reading of the line tension.
Enquiry Form
This is a short form you can submit to request information from Active Lifting:
